Table of Contents
Advertisement
The handles can be removed.
Handle
Caution
• The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle screws which were removed from this monitor.
• Be sure the handles are attached securely.
1
3
Camera mount
Removing the Handles
Handle screws
Mounting a web camera
Camera mount (small)
2
Camera mount (large)
2
It is possible to mount the PN-ZCMS1 Video-Conferencing
Soundbar (optional) or a commercially available web camera
(1.1 kg (2.4 lbs.) or less) with the camera mount (small)
(supplied).
1. Remove the screws from this monitor.
2. PN-LA862/PN-LA752:
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652:
Attach the camera mount (small) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
3. Attach the PN-ZCMS1 (optional) on the camera mount
with the camera screw (inch thread) (x1) (supplied).
It is possible to mount the our recommended web camera with
the camera mount (large) (supplied). Contact your dealer for
our recommended web camera.
1. Remove the screws from this monitor.
2. PN-LA862/PN-LA752 :
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x12) (x2) (supplied).
PN-LA652:
Attach the camera mount (large) (supplied) with the
camera mount screws (M3x8) (x2) (supplied).
The camera mount screws are different depending on the
monitor.
TIPS
• For mounting instructions of web camera (optional), refer to
the instruction manual for the web camera.
17
E
Advertisement
Table of Contents
