Sharp InGlass PN-LA862 Operation Manual page 30

Menu Items
RESET
Resets the values of the PICTURE menu items to the factory default settings.
For the settings saved for "PICTURE MODE", the settings saved for the currently selected "PICTURE MODE" are initialised.
Select "ON" and then press the ENTER button.
nAUDIO
AUDIO MODE
Preset values for "VOLUME", "TREBLE," "BASS," and "BALANCE" can be set for each audio mode.
VOLUME
Adjusts the volume.
TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
MUTE
Can temporarily turn off the volume.
AUDIO OPTION
AUDIO OUTPUT
Sets the volume of sound output from the audio output terminals.
When set to "VARIABLE 2", sound will not be output from the built-in speaker.
VARIABLE1 ........ You can adjust the volume using "VOLUME".
VARIABLE2 ........ You can adjust the volume using "VOLUME".
FIXED................. Fixes the sounds.
MONAURAL AUDIO
Outputs audio signals as monaural.
MUTE WITH FREEZE
Set whether or not audio turns off during freeze.
RESET
Resets the values of the AUDIO menu items to the factory default settings.
For the settings saved for each "AUDIO MODE", the settings saved for the currently selected "AUDIO MODE" are initialised.
Select "ON" and then press the ENTER button.
nMULTI/PIP
PIP/PbyP
PIP MODES
Sets the display method.
OFF ........... Displays one screen.
PIP ............ Displays a sub screen inside a main screen.
PbyP .......... Displays a main screen and a sub screen in a line.
PbyP2........ Displays a main screen which measures 2560 pixels in the longest direction and a sub screen in a line.
PIP SIZE
Sets the size of the sub screen in PIP mode.
PIP H-POS
Adjusts the horizontal position of the sub screen in PIP mode.
PIP V-POS
Adjusts the vertical position of the sub screen in PIP mode.
PIP BLEND
In PIP mode, use this menu item to display the sub screen transparently.
PIP SOURCE
Selects the input signal of the sub screen in PIP, PbyP or PbyP2 mode.
SOUND CHANGE
Sets the sound which is output in PIP, PbyP or PbyP2 mode.
MAIN POS
Sets the position of the main screen in PbyP or PbyP2 mode.
PbyP2 POS
Sets the position of the sub screen in PbyP2 mode.
30
E