Table of Contents
Advertisement
INPUT
INPUT MODE NAME
For each terminal, you can change the input mode name that is displayed during input mode selection or display.
The names of INPUT1 to INPUT6* can be changed. (*Factory default.)
(1)
Select the input mode name (INPUT1 to INPUT6) that you want to change, and press the ENTER button.
If the input mode name can be changed, "EDIT: [ENTER]" will appear.
(2)
Move the cursor to the character that you want to change with the
or
button.
Change the character type with the MODE button (upper case alphabet, lower case alphabet, numbers, symbols).
(3)
When you have finished the change, press the ENTER button.
Up to 18 characters can be used.
AUTO INPUT CHANGE
CONNECT AUTO INPUT SELECT .... Sets whether the input into the input terminal automatically changes when a video signal
NO SIGNAL AUTO INPUT SEL. .... Specify whether to change inputs automatically. When "ON" is selected and no signal is
AUTO INPUT SELECT PRIORITY ... Sets the order of input terminal priority for "NO SIGNAL AUTO INPUT SEL.".
CEC SETTINGS
HDMI CEC LINK
AUTO ............................................ Use the HDMI CEC function.
OFF ............................................... HDMI CEC function is not used.
POWER CONTROL LINK* ............ Sets whether an external device connected via HDMI-CEC is turned off when the monitor
AUDIO RECEIVER ....................... This can be set when "HDMI CEC LINK" is set to "AUTO".
START INPUT MODE
You can set the input mode that will be in effect when the power is turned on.
When this is set to "LAST INPUT MODE", the input mode when the power was last turned off will appear.
* When "NO SIGNAL AUTO INPUT SEL." is "ON" and there is no input signal in the set input mode, the input mode will
change to the input mode that has an input signal.
USB-C SETTING
Sets the lane for video output.
LOCK USB-C SETTING
OFF ............................................... Enable "USB-C SETTING" in the PICTURE menu.
ON ................................................. Disable and grey out "USB-C SETTING" in the PICTURE menu.
USB-C SETTING
DP 2 LANE(RECOMMENDED) .... Priority is given to USB 3.0 high-speed communication; DP video is fixed at 2 lanes.
DP 4 LANE / USB2.0 ................... The lanes are used with priority on video. USB 2.0 can be used, but USB 3.0 cannot be used.
COMMUNICATION SETTING
LAN PORT
Sets whether to enable LAN.
LAN SETUP
Configures the settings to control the monitor from the computer via LAN. (See page 41.)
CONTROL FUNCTION
COMMAND(LAN)
Sets whether to enable LAN commands. For detailed settings, configure them in the web browser.
COMMAND(RS-232C)
Sets whether to enable RS-232C commands.
HTTP SERVER
Sets whether to enable the control form web server.
is input into that terminal.
(With some input signals, the input may not change.)
present in the selected input mode, the monitor automatically changes the selected mode
to another mode where a video signal is present.
When there are video signals in multiple input modes, switching takes place according to
the order of priority set in "AUTO INPUT SELECT PRIORITY".
When an option that supports this function is connected to the option board slot, you can
set the order in OPTION.
(If the option does not support this function, OPTION will not appear.)
Input does not change automatically for terminals without a priority setting.
The lower the number, the higher the priority.
If the device connected to the HDMI input terminal supports CEC, the input mode of the
monitor changes to HDMI when playback starts on the device.
is switched to Power off (Standby state).
Sets whether the monitor is switched to Power off (Standby state) when an external
device connected to HDMI-CEC is switched off.
Set whether the monitor is turned on when an external device connected to HDMI-CEC is
turned on.
*The connected HDMI-CEC compatible device may not go into standby if it is recording.
If the device connected to the HDMI2 input terminal supports ARC, audio is output from
the terminal.
or
button, and change the character with the
Menu Items
33
E
Advertisement
Table of Contents
