Daikin ETVH16UE6V7 Installer's Reference Manual page 223

Bizone kit
EPRA14~18D + ETVH16SU18+23E
Daikin Altherma 3 H HT F
4P644738-1D – 2023.10
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
4 Remove the USB memory stick and close the user interface
panel.
Additionally to the settings listed below, make sure to also set [7‑02]=1 (i.e. [4.4]
Number of zones = Dual zone) when a bizone kit is installed.
See also "6.2.3 Multiple rooms – Two LWT
zones" [ 4 182].
Bizone kit installed
# Code
[9.P.1] [E-0B]
zones" [
Description
Bizone kit installed:
▪ 0 No : The system only has a main zone.
▪ 1 N/A
▪ 2 Yes: A bizone kit is installed in order to add
an additional temperature zone.
10 Configuration
|
—
—
4
44] and "Number of
Installer reference guide
223