Table of Contents
Advertisement
3.3.1 Keys for Dome camera
Function
Key Label
Camera
0..9 + CAM
selection
Cancel
ESC
ALRM
Alarm
Relay ON
OFF
Relay OFF
PREV
Previous
NEXT
Next
HOME
Home
GLBL
Global
Call Preset
PRST
position
Tour
TOUR
Pattern
PTRN
Auto Scan
SCAN
MENU
Configuration
CTRL/PGM
Program
Control
CTRL/PGM
Enter
ENTR/GLBL
Manual Focus
Manual Iris
Zoom
Twist
Up / Down
Left / Right
Joystick
Press(Toggle)
Displays the selected camera on the spot out of the multiplexer and allows the
camera to be controlled by the keyboard controller, if the selected camera is a dome
camera.
Function number selection with function keys.
(e.g., 1 + CAM, 3 + TOUR, 5 + SCAN, 6 + PRST)
Cancels current inputs.
Exits from currently running functions or menu, error status, etc.
Disregards all currently activated alarms and turns off the beep temporarily. If alarm
is activated again within the programmed hold time, the timer will restart and beep
again.
ON
Relay No. 1~4 + ON will activate the selected relay.
Relay No. 1~4 + OFF will disable the selected relay.
Allows the previous dome camera to be controlled manually.
Allows the next higher number dome camera to be controlled manually.
Immediately calls Home function.
Deletes selected value or function in programming mode
Sends all cameras to preset (e.g., 1, 2... 5 5 + ENTR/GLBL).
8 8 8 + ENTR/GLBL: Night shot mode, 9 9 9 + ENTR/GLBL: Normal mode
Pressing Prst will bring up the preset programming menu.
Recalls preset;( e.g.; 1 , 2 ... 3 1 ... 2 4 0 + PRST )
In the preset or tour programming mode, the operator can review the exiting preset
(selected by cursor) by pressing this key.
Pressing TOUR will bring up the tour programming menu directly
Recalls programmed presets or functions sequentially. (e.g., 1 ~ 8 + TOUR)
Pressing PTRN will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g., 1 ~ 4 + PTRN)
Pressing Scan will bring up the Auto Scan programming menu.
Calls Auto panning function (e.g., 2 + SCAN repeats Auto Scan 2).
Enters programming menu.
CTRL+MENU will invoke Keyboard set up menu
No. + CTRL/PGM + PRST will store current view as a preset directly.
No. + CTRL/PGM + TOUR will open programming menu
No. + CTRL/PGM + SCAN will open programming menu
CTRL+Joystick : In a programming mode (Preset, Pattern, Scan, Privacy....) the
joystick operates as if in the normal control mode.
While pressing and holding down the CTRL key, all movements of the joystick will
start recording when in the pattern programming menu.
CTRL+Joystick:, In normal operation mode, manual speed of the joystick control will
be operated in turbo mode. (Max. speed = 380º /sec)
Completes entering data for the password or title
ENTR+Joystick : Direction key in DVR remote mode or Mux ( PTZ, Mouse, Cursor)
Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode.
Overrides auto iris. Moving the joystick reactivates Auto Iris mode.
Zoom control.
Zoom control (proportional to position).(HID2404CZx model only).
Tilt control, Cursor Up / Down in the PGM. menu
Pan control, Cursor Left / Right or Page scroll in the PGM. Menu
Pressing the joystick toggles between zoom control mode on and off. When zoom
control mode is on, you can see letter "Z" on the lower right corner of the LCD.
(joystick up : zoom in & joystick down : zoom out) (HID2404CLx model only).
Descriptions
27
Advertisement
Table of Contents
