Hitron FASTRAX II Instruction Manual page 22

C. Open the menu of the KBD controller by pressing CTRL + MENU Key.
D. Set as below in Network menu.
Set Baud Rate
D1
D2/DVR
MUX/AUX
DVR/AUX
5. How to setup PC DVR
A. Switch the PC DVR on.
B. If press setup button on the above screen, the below screen will be appeared.
C. Select camera input number that dome camera connected. Then install as below to select set-up PTZ
after checking PTZ box.
: 9600
: 9600
: 9600
: 9600
Com Ports
D1 :
D2/DVR :
MUX/AUX :
DVR/AUX :
22
Dome
AUX IN
None (OR ETC)
PC-DVR