Master/Slave Mode Setup - Hitron FASTRAX II Instruction Manual

Keyboard controller
Table of Contents

Advertisement

Save and Exit
Note) AUX IN : auxiliary signal input (simplex mode)
AUX I/O : when auxiliary signal input , respond to the signal (Half duplex mode)
- Set Slave Kbd
Slave Kbd
: ON/OFF
MUX control : ON/OFF
DVR control : ON/OFF
Dome Menu : ON/OFF
Rel Time
: INF/001~200s INF (Infinite) - Slave Keyboard user never has the right to control the
Save and Exit
- Exit
- Data Bank
-
Up/Download saved data of the dome
DataBank 1 : 001
Upload
Clear Data
DataBank 2 : Empty
DownLoad
Exit
Alarm
- Alarm Check : ON/OFF
- Alarm Beep : ON/OFF
- Save and Exit
Time/Date
- Display : ON/OFF
- Date/Day: 23 SUN
- Month
: JAN
- Year
: 2005
- Hour
: 20
- Minute
: 18
- Save and Exit
LCD
- BRIGHT : 01~13
- Save and Exit

2.5 Master/Slave mode Setup

You can use two keyboards at a distant site.
Master keyboard should be setup with the following procedure.
1. Check for dip switch the 7
2. Press CTRL + MENU. Check Slave KBD setting "ON". (Network : Set Slave Kbd : Slave Kbd : ON)
Slave keyboard needs to be setup with the following procedure.
1. Check for dip switch the 7
2. If you setup all connection correctly (See Figure 4) and turn on slave keyboard, you should see the
following screen.
ON- Slave KBD exists, OFF- Not exist.
Set accessibility of the multiplexer menu at slave keyboard
Set accessibility of the DVR at slave keyboard
Set accessibility of the dome camera menu at slave keyboard
dome which is selected by master Keyboard users.
1 ~ 200s( Second) - after elapsed time master keyboard control the dome
use before the slave keyboard controller gains control.
001— Data from Dome ID 001 exist on Bank 1
To confirm your option to the selected dome
press ENTR key, otherwise press ESC key to cancel and exit.
To confirm your option from the selected dome
Press ENTR key, otherwise press ESC key to cancel and exit.
Whether K/B checks the alarm input of domes or not.
On : 32 domes, Off : 64 dome cameras supported.
When dome's alarm, beep sound on or off
th
of S2 is "OFF". (Default)
th
of S2 is "ON".
17

Advertisement

Table of Contents
loading

Related Products for Hitron FASTRAX II

This manual is also suitable for:

Hid2404czHid2404cl

Table of Contents