Keyboard Setup - Hitron FASTRAX II Instruction Manual

2.4 Keyboard Setup

To setup the keyboard controllers, the user needs to setup the network, passwords and perform special
tasks such as Uploading and Downloading programmed data from the dome cameras. To enter the
Keyboard menu, press Ctrl + Menu. You will see the following menu. Joystick Up/Down scrolls menu items,
push the stick to Right to enter the sub-menu.
Configuration
Network
Data Bank
Alarm
Time/Date
LCD
Exit
Configuration
- Key Beep
- Key-Lock
- Chg User Pin -
CurrentPin : Enter 4 digit current user's password.
NewPin
ConfirmPin : Confirm 4 digit new password.
- Chg Admin Pin -
CurrentPin : Enter 4 digit new password.
NewPin
ConfirmPin : Confirm 4 digit new password.
Note) Factory default Administrator's password is 9999+Entr and user password is 1111+Entr.
If you forgot your own password, contact service personnel or distributor.
- Rescan Domes
- Save and Exit
Network
- Set Baud rate
D1 : 2400~230K
D2/DVR : 2400~230K
MUX/AUX : 2400~230K
DVR/AUX : 2400~230K
Save and Exit
- Com Ports
D1 : None/Dome ...
D2/DVR : None/Dome/DVR1/DVR2/PC-DVR/AUX IN/AUX I/O
MUX/AUX : None/DUPLEX/TRIPLEX /AUX IN/AUX I/O
DVR/AUX : None/DVR1/DVR2/PC-DVR/AUX IN/AUX I/O
: ON - Enable key beep sound,
OFF - Disable beep sound.
: OFF~60Min - After elapsed setup time, keyboard locks automatically.
OFF - Disable Auto Key-Lock function.
User needs the login password to operate the Keyboard again.
Change 4digit user password.
: Enter 4 digit new password.
Change 4 digit administrator's password.
: Enter 4 digit new password.
Scan newly installed dome cameras without turning off the Keyboard power.
Save the programmed data and return to the previous Menu
(Exit without saving if you press ESC key)
Setup properties of devices to be connected.
DOME1 PORT OF J-BOX (RS-485)
DOME2 PORT OF J-BOX (RS-485)
MUX PORT OF J-BOX (RS-485)
DVR PORT OF J-BOX (RS-232C)
Select the device to be connected on the selected port.
16