Table of Contents
Advertisement
Replacing Clock/Remote Battery
The clock and remote batteries are pre-installed. Follow the steps below if replacement
becomes necessary.
WARNING:
Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another
battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
away from children. Do not recharge, disassemble or dispose of in fire.
Clock Battery
Tripod Mounting Hole
1
1 While pinching 2 tabs, pull Battery
Tray out.
2 Bend middle tab out and remove
Battery.
3 Snap new Battery (® mark down) into
Battery Tray.
* Do not reverse the polarity.
4 Insert Battery Tray so the triangle
2
`
marks meet.
e
Note:
* Keep Battery out of children's reach.
3 — Son
Swallowing it may be harmful.
* improperly installed, discharged, or
missing battery causes "CLOCK
BATTERY" to appear when DISPLAY is
pressed.
* Battery life is approximately 5 years.
1 O While pressing stopper tab,
(S pull Battery Tray out.
2 Insert battery into tray with ® mark
down.
* Do not reverse the polarity.
3 Replace Battery Tray.
51
Advertisement
Table of Contents
