Table of Contents
Advertisement
Security Mode
detected.
* Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
* Insert cassette with record tab (page 11).
• Set POWER to CAMERA.
• Securely position and aim Camcorder.
1 Press MENU for
A
MENU mode.
SELE Deo E
Press UP A or
VIDEO ЕТО ; FADE
DOWN Y to select
| „ыст: pusu wa Key
=
РІАҮ
SECURITY f
END $ PUSH MENU KEY.
2 Press DISPLAY to select ON.
3 Press MENU for Motion Security
stand-by mode. (If cassette is not
inserted, "[e sl" will flash.)
Motion Security may mistakenly start
when:
* background is plain, like a white wall, or
mba
has distinct vertical, horizontal, or
STAND-BY
slanted stripes, like a venetian blind.
* brightness suddenly changes.
MOTION
SECURITY
* Recording will start about 3 seconds
after motion is detected.
• Date and time are recorded if
displayed in EVF or LCD monitor
Motion Security may not start when:
* motion is very slow or fast.
* moving object is very small.
e motion occurs only in 1 corner of
viewing area.
(page 14).
* in poor lighting (in this case, MOTION
* Recording stops about 30 seconds
SECURITY flashes).
after motion ceases.
* background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
To cancel Security Mode, set POWER to
OFF.
Note:
• Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
recording.
* While in Motion Security stand-by, the
following functions are not available:
Record/Pause, Stand-by mode, Digital
E.I.S., Video Effects (Auto/Digital Fade).
29
Advertisement
Table of Contents
