Table of Contents
Advertisement
High Speed Shutter
Improves Still or Slow Motion playback
Before you begin...
picture of high speed subjects (e.g. a tennis
• Connect Camcorder to power source.
stroke), when viewed on Camcorder or
3or
* Insert cassette with record tab (page 11).
4 head VCR.
* Set POWER to CAMERA.
In AUTO mode (no indication in EVF or LCD Monitor), shutter speed is auto-adjusted from
1/60 to 1/350 according to subject brightness.
* AUTO mode is selected each time POWER is set to CAMERA.
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
1 Press MENU for MENU mode.
Press UP A or DOWN V to select
SHUTTERE
2 Press DISPLAY repeatedly to select
shutter speed.
--- MENU ---
PROGRAMMED REC
TITLE
; AUTO/MANUAL
; AUTO
STAND-BY RELEASE ; OFF
CLOCK SET
y
SELECT : PUSH V/A KEY
: PUSH DISPLAY KEY
: PUSH MENU KEY
SET
END
[^
1/60 1/100 > 1/250 > 1/500
1/10000 «1/4000 + 1/2000 «- 1/1000
3 Press MENU to exit.
Note:
* Provide additional halogen or tungsten light
for use indoors or in poor light. Fluorescent
light degrades picture.
e Auto Focus may not function properly if high
speed shutter is used in inadequate light.
e Setting reverts to AUTO each time POWER
is setto CAMERA.
24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts
@ panasonic.com
Advertisement
Table of Contents
