Summary of Contents for CrimeStopper Infinity CS-2900DP-FM
Page 1
INTRODUCTION CONGRATULATIONS on your choice of the Infinity™ with 2-Way Data Port (DP) technology by Crimestopper Security Products Inc. This device complies with FCC Rules part 15. Operation is subject to the following two conditions: 1) This device may not cause interference, and (2) this device must accept any interference that may be received, including interference that may cause undesired operation.
Page 2
All manuals and user guides at all-guides.com Button 5 INFINITY Car / 2 Main Manu Button 1 Button 2 Lock Unlock Button 3 Button 4 Aux. Output Remote Start BASIC TRANSMITTER OPERATIONS: Button 1 ARM / PANIC: (press and hold for 3 sec. for Panic) Button 2 DISARM: (Unlock driver door) / Press again within 4 to 15 sec.
Page 3
All manuals and user guides at all-guides.com 2-Way Infinity™ DETAILED BUTTON OPERATION 1) Press any button to turn on LCD backlight and display Desktop. 2) Press Button ONCE to activate 1 Car Function. Car function activated, wallpaper for 1 Car will be displayed There are 8 background colors available for 1 Car.
All manuals and user guides at all-guides.com 5) To Exit MAIN MENU Press to exit, Desktop will be displayed. 6) CLOCK ADJUSTMENT CLOCK ADJUST 08 : 00 Press to enter CLOCK ADJUST. Press to adjust HOUR up or down. Press to SET the HOUR.
Page 5
All manuals and user guides at all-guides.com 8) DAILY-START ADJUSTMENT DAILY START Press to enter DAILY-START ADJUSTMENT. This setting will allow you to select a specific time in the day for your vehicle 06 : 00 to automatically start. Press to adjust HOUR.
All manuals and user guides at all-guides.com CHANGING THE BATTERY The Infinity remote uses a standard 1.5 volt AAA battery. The battery power is displayed by 4 bars on the lower left corner of LCD display. See next page. You will see only 1 or 2 bars on the LCD screen when it is time to replace the AAA battery.
Page 7
All manuals and user guides at all-guides.com REMOTE AUX OUTPUT 2, 3 and 4 (Optional, requires special programming) This system contains three extra auxiliary outputs to activate other accessories or devices. These outputs are programmable for: momentary ½ second, momentary push and hold, timed (1 to 255 seconds) or a latched ON/OFF function.