CrimeStopper Super Rage CS-2011RS Operating Instructions Manual
Remote control alarm system & remote engine starting system
Hide thumbs
Also See for Super Rage CS-2011RS:
- Installation handbook (30 pages) ,
- Installation instructions manual (18 pages) ,
- Operation instructions manual (16 pages)
Advertisement
Quick Links
Remote Control Alarm System & Remote Engine Starting System
CONGRATULATIONS on your choice of a Super Rage™ Alarm & Remote Engine Starter by Crimestopper
Security Products Inc. This booklet contains the information necessary for using & maintaining your system.
If any questions arise, contact your installation dealer or Crimestopper Security Products Inc.
CONTACT INFORMATION:
TECHNICAL SUPPORT (800)-998-6880
Monday - Friday 8:00am - 4:30pm Pacific
Website: www.crimestopper.com
E-mail: tech-support@crimestopper.com
CRIMESTOPPER
SECURITY PRODUCTS, INC.
1770 S. TAPO STREET
SIMI VALLEY, CA. 93063
CS-2011RS
Super Rage™
OPERATION INSTRUCTIONS
INTRODUCTION
This device complies with FCC Rules part 15. Operation is subject
to the following two conditions: 1) This device may not cause
interference, and (2) this device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference
equipment. Such modification could void the user's authority to
operate the equipment.
caused
by
unauthorized
modification
to
this
Advertisement
Related Manuals for CrimeStopper Super Rage CS-2011RS
Summary of Contents for CrimeStopper Super Rage CS-2011RS
- Page 1 Remote Control Alarm System & Remote Engine Starting System CONGRATULATIONS on your choice of a Super Rage™ Alarm & Remote Engine Starter by Crimestopper Security Products Inc. This booklet contains the information necessary for using & maintaining your system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc.
-
Page 2: Operation Cautions & Warnings
OPERATION CAUTIONS & WARNINGS CRIMESTOPPER SECURITY PRODUCTS, INC. and its VENDORS shall not be liable for any accident resulting from the use of this equipment. This system is designed to be professionally installed into a car or vehicle in goo running order. - Page 3 OPERATING INSTRUCTIONS Passive Arming Mode: (Programmable) Passive (automatic) arming occurs 30 seconds after the ignition is turned off and the last door is closed. Upon closing the last door, the unit will flash the lights twice and LED will be flashing rapidly to confirm passive countdown.
- Page 4 Valet Park mode. Optional M.A.P. (Mobile Accessories Protection) This system can be programmed to provide Crimestopper’s unique M.A.P. (Mobile Accessories Protection) feature that allows you to prevent unauthorized access of your vehicles Audio, Cellular, Navigation, or Entertainment systems. This feature is OPTIONAL and will requires extra parts and labor for installation.
-
Page 5: Remote Engine Control
REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press remote start button on the remote transmitter. 2) Parking lights flash once, then turn on solid, Ignition/Acc On. 3) After 6 seconds Starter Motor engages, Parking lights and Acc circuits turn off while cranking. 4) Engine Starts and Runs. - Page 6 IDLE DOWN MODE: This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will remain running for the programmed run time, until you return, or press the remote start button.
- Page 7 INFINITY RUN MODE This mode allows the vehicle’s engine to remain running INDEFINITELY. This mode can be beneficial to law enforcement vehicles or commercial vehicles trucks that need to remain running unattended for long periods of time. INFINITY RUN MODE – EXITING THE VEHICLE: 1) Have engine running with the Key, then press the Start button on the transmitter once, then press the remote start button a second time within 10 seconds.
-
Page 8: Carjack Protection
REMOTE OPERATED CARJACK PROTECTION This feature provides Active Carjack protection through the remote control. When the Ignition is on (vehicle is running), press and hold the #1 LOCK Button and #3 TRUNK Button for 2 seconds. The parking lights will flash 2 times and the LED will begin to flash rapidly to confirm the beginning of a Carjack countdown.