Table of Contents
Advertisement
"Wolfsburg"
K
2
"Emden"
2
"Hannover"
L
M2
7
"Ingolstadt" (mono)
3(9)
26
www.vw-t2-bulli.de
Radios
1 - Rotary knob: On — off, volume
3
2 - Press buttons for tone control
3 - Press buttons for wavebands:
U = VHF
4 - Rotary knob for tuning
4
5 - Station markers
3
6 - Slide for tone control
down - bass
8
7 - Press button for automatic station seeker*
8 - Rotary switch for station seeker sensi-
tivity
M1
3
9 - Station press buttons**
4
K = Short wave
M = Medium wave
L = Long wave
— treble
up
— powerful stations only
up
down — all stations
within range of the set.
* Pressing this button starts the automatic
station seeker ("Hannover") which then tunes
in to the nearest station (according to position
of sensitivity switch) on the selected waveband.
If button is pressed again, the station seeker
tunes in to the next nearest station.
When the waveband is changed, the last
station selected on the previous waveband
remains tuned in.
** Station press buttons ("Ingolstadt") make
it possible to pre-set a station on the wave-
band concerned. Tune in station exactly with
rotary knob (4). Pull button out and press it in
again. This sets the station to this button so
that it can be selected again by just pressing
the button. The button can be set to another
station at any time.
Advertisement
Table of Contents
