Long Document Scanning
Setting the scanner to the Long Document Mode enables scanning
documents up to 5,588 mm long (220") (or up to 3,000 mm (118.11")
with the DR-G2090).
The Long Document Mode can be set with the scanner driver or by the
selecting [Long Document] in User Mode.
Setting with the Scanner Driver
By default, the Long Document Mode is set by the scanner driver.
1
Open the scanner driver's setting screen.
2
In the [Basic] tab, click the [Setting] button of [Page Size]
[Page Size Settings] dialog box will open.
3
Click the [Long Document Mode] tab and specify the
Long mode.
Depending on the length of the document, select [Long Document
Mode (1000 mm)], [Long Document Mode (3000 mm)], or [Long
Document Mode (5588 mm)].
(See p. 73)
• The [Long Document Mode (5588mm)] setting is not available
in the DR-G2090.
• If you select the [Feed slowly] check box, documents are fed at
a slow rate, regardless of resolution or mode settings.
47
Hint