Canon imageFORMULA DR-G2140 User Manual page 17

● Never connect the power cord when your hands are wet.
● Do not connect the scanner to a multi plug power strip.
● The machine must be connected to a socket-outlet with grounding
connection by the provided power cord.
● Do not knot or coil the power cord as this may result in a fire or
electric shock. When connecting the power cord, make sure that the
power plug is securely and completely inserted into the power outlet.
● To use a reel-type extension cord, unwind all of the cord from the
reel. Long-term operation with the cord wound on the reel may
cause the cord to overheat and could cause a fire.
● Do not use power cords other than the power cord supplied with this
scanner.
● Never try to take the scanner apart or modify it in any way, as this
is dangerous and may lead to a fire or electric shock.
● Do not use flammable spray near the scanner.
● When cleaning the scanner, turn the power switch OFF and
disconnect the power plug from the power supply.
● Clean the scanner using a slightly dampened cloth which has been
well wrung out. Never use alcohol, benzene, paint thinner, or any
other flammable substances.
● If an abnormal sound, smoke, heating, or an unusual odor occurs,
or when an abnormality is discovered such as the scanner not
working after turning the power OFF and back ON, immediately turn
off the power switch and unplug the power plug from the outlet.
Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.
● Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately turn the
power switch OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.
● Before moving the scanner, make sure to turn the power switch
OFF, and disconnect the power plug from the power outlet.
CAUTION
● Be careful not to directly touch the ink in the imprinter ink cartridge.
● Do not install the scanner on a surface that is unstable or tilted, or
in an area subject to excessive vibrations,as this may cause the
scanner to fall, resulting in personal injury or damage to the
scanner.
● Do not block the ventilation holes. Doing so could cause the
scanner to overheat, creating a fire hazard.
● Never place small metal objects such as staples, paper clips, or
jewelry on the scanner. These items may fall into the scanner, and
cause a fire or electric shock. Should such objects ever fall inside
the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact
your local authorized Canon dealer or service representative to
have the unit serviced.
● Do not install the scanner in a humid or dusty location. Doing so
might cause a fire or electric shock.
● Do not place objects on top of the scanner. Such objects may tip or
fall over, resulting in personal injury.
● When unplugging the power cord, grasp it firmly by its plug. Do not
pull directly on the power cord, as this may damage or expose the
cord's internal wiring, resulting in a fire or electric shock.
● Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you
will be unable to unplug it in an emergency.
● Do not allow water or flammable substances (alcohol, paint thinner,
benzene, etc.) to spill into the scanner, as this may result in a fire or
electric shock. Doing so might cause a fire or electric shock.
17