Canon imageFORMULA DR-G2140 User Manual page 27

E Function Key
Executes the assigned function.
F OK Key
Selects the user mode, and accepts settings.
G Stop Key
Stops a scan in progress.
H Start Key
Starts scanning.
I Back Key
Returns to the previous display panel screen.
J Job Key
Selects jobs. (See p. 70)
(See p. 55)
Display panel examples
The information displayed on the display panel changes depending on
the status of the scanner.
The following are representative examples.
● Information displayed on the screen
A Title area
Shows the scanner's connection mode.
When USB is connected, "(USB)" is displayed after the title. When
the scanner and computer are connected via a network, "(LAN)" is
displayed. However, neither "(USB)" nor "(LAN)" is displayed on
USB-only models.
B Comments area
Displays available menu and job items, error messages, etc.
C Operation buttons area
Icons that control scanning operations and indicate setting states
are displayed.
The icons displayed are as follows.
: Separation Mode setting
: New File setting
Keys
Keys
(OK) Key
(Start) Key
27