Using The Remote 1-Way Remote - CrimeStopper CoolStart RS-1604TW1 Operating Instructions Manual

OPERATION:
BUTTON 1 (Lock Symbol):
Press and release to Lock doors.
Press and Hold for more than 3 seconds to
activate "Panic" feature.
BUTTON 2 (Unlock Symbol):
Press and release to Unlock doors.
BUTTON 3 (Trunk Symbol):
Press and Hold for two seconds to activate
trunk pop (Optional Feature) .
BUTTON 4 (Start):
Press and Hold for two seconds to Start/Stop
Engine
BUTTON 5 (Side button)
§ Press and Release to show the previous
status.
§ Press and Hold for 5 second to switch to
vehicle #2.
The transmitter supplied with the CoolStart system contains four buttons, flashlight, and vehicle 2 switch. The
button configuration of the CoolStart system is Factory-set and unchangeable. See Page 16 for additional
information on how to use your remote to operate a second vehicle equipped with a CoolStart system.
NOTE: BUTTON #4 and #3 Remote Start/Trunk
There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent
accidental remote starting from the remote being in your pocket or purse. During normal use, if you press button
#4 or #3 too quickly, the system may not start the engine or open trunk.
USING THE 1-WAY REMOTE
#1
LOCK
#3
TRUNK
Replacement Battery
GP23A (12volt)
6
UNLOCK
FLASHLIGHT
VEHICLE 2
COOLSTART
REMOTE
#2
#5
#4
START