Table of Contents
Advertisement
Upgrading a module
3.2 Creating a bootable USB flash drive
Command:
Description:
Command:
Description:
3.2
Creating a bootable USB flash drive
A bootable USB flash drive is required by various applications to update the firmware
on the RUGGEDCOM APE.
Requirements
•
26
•
ape-we10-SAML – Detect and install only RUGGEDCOM
CROSSBOW SAM-L images.
•
elan – Detect and install only RUGGEDCOM ELAN images.
•
crossbowadm – Detect and install only RUGGEDCOM
CROSSBOW ADM images.
•
cloudconnect – Detect and install only Siemens CloudConnect
images.
•
bios – Detect and install only BIOS images.
{ version }
•
latest – Select ony the latest software image version.
•
{ specific-release } – Select a specific software image
version.
•
{ showversions } – List available software image versions.
Examples
Installing the latest ape-linux image:
root@upg-stick:~# apeflash ape-linux latest
Showing the versions for each available software image:
root@upg-stick:~# apeflash ape-linux showversions
Looking for files matching imageape18xx-linux-(.+)-amd64\.tar\.bz2
Versions found:
10.2022-07-11
Should I check for newer images to download? [Y/N]: : n
cat /etc/os-release
Displays the version of the APE Software Upgrade Tool installed on
the USB flash drive.
lsblk -h
Displays the NTFS data partition size.
A copy of the firmware to install, including any associated GPG signature file.
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 08/2023, C79000-G8976-1415-06
Advertisement
Table of Contents
