Programmable Options - CrimeStopper CS-882OEM Installation And Operating Instructions Manual

Alarm upgrade for factory keyless entry

Hide thumbs Also See for CS-882OEM:

Installation and operating instructions manual (12 pages)

Install manual (5 pages)

Table Of Contents

Table of Contents

1. Turn the Ignition ON and press the Override/Program button 7 times within 10 seconds.

2. Turn OFF Ignition. LED will flash slowly once per second as and indicator the system is in programming

mode.

3. Within 20 seconds, press the Override/Program button the number of times that corresponds to the feature

list below. The siren will chirp for each button press. DO NOT LOSE COUNT!! If you can hold down the

button for 3 seconds and release you get 2 chirps. A 3-second button press is the same as pressing the

button 10 times.

4. When you get to the desired option number, turn the Ignition from OFF to ON to toggle between the preset

and alternate settings. The siren will chirp once or twice indication which value the feature is at. See Below

for Option numbers, descriptions, and values. Ignition should be left in the OFF position once your have

the correct value.

5. At this time, if you need to change more options, repeat steps 3 & 4 above.

6. To exit programming Mode, Turn Ignition ON and press the Override/Program button once.

Option #