Installing The Bridge Cast App And Driver - Roland BRIDGE CAST X Owner's Manual

Installing the dedicated app and driver

Installing the BRIDGE CAST app and driver

To operate this unit and configure its settings, install the "BRIDGE CAST" dedicated app on your computer.
A dedicated driver must be installed to connect this unit to a computer and to handle multiple audio sources.
USB I, II connection setting
switch
PC
USB I: MOBILE
USB II: MOBILE/CONSOLE
You can connect your computer to either the USB I or USB II port when installing the app.
â
Windows users
â
Mac users
à Windows users
Downloading and installing the dedicated app and driver
1. Launch your browser and access the following website.
https://roland.cm/bridgecastx
2. From the downloads page, search for "BRIDGE CAST X USB Driver Ver.xxx for Windows 10/11" and click
on the link.
3. Right-click on the compressed file that was downloaded, and select "Extract All".
4. Double-click the Setup file.
5. Follow the onscreen instructions to install the dedicated driver.
6. Set either the USB I or USB II connection setting switch to "PC", to match the USB port to which you've
connected your computer.
7. Use a USB cable to connect the USB port that's set to "PC" to your computer, and then turn on this unit.
* You don't need to install separate drivers for the devices connected to USB I and II.
Downloading the BRIDGE CAST app
1. Launch your browser and access the following website.
https://roland.cm/bridgecastx
2. From the downloads page, search for "BRIDGE CAST APP Ver.xxx for Windows" and click on the link.
"xxx" indicates the version number.
3. Follow the onscreen instructions to download the BRIDGE CAST app.
16
Driver USB input/output
Dedicated driver Audio: 4 input/3 output, MIDI, video (USB II only), keyboard (HID)
output
Standard OS Audio: 1 input/1 output, video (USB II only)
driver