Roland BRIDGE CAST X Owner's Manual page 12

Panel descriptions (on BRIDGE CAST X)
PC:
when connecting to your computer
This lets you transmit and receive audio and MIDI messages between multiple devices.
Audio input Audio output
(source)
CHAT MIC (mic audio:
GAME not routed
MUSIC through a bus)
SYSTEM STREAM (STREAM
MIX bus audio)
PERSONAL
(PERSONAL MIX
bus audio)
The dedicated driver must be installed when you use the "PC" setting.
â
Installing the BRIDGE CAST app and
MOBILE: when connecting to a video game console, iPad or iPhone
This lets you transmit and receive the following audio signals.
You can also connect a computer with the "MOBILE" setting.
Audio input (source)
CONS/MOBI (CONSOLE/MOBILE)
4. USB I port (USB Type-C
Use the included USB Type-C
video game console.
The USB I connection setting switch
5. USB I connection setting switch
Set this to "PC" or "CONSOLE/MOBILE", according to which device you connect to the USB I port.
The unit determines the state of the USB I connection setting switch when it starts up. Do not change the switch's setting
after starting up this unit.
PC:
when connecting to your computer
This lets you transmit and receive audio and MIDI messages between multiple devices.
Audio input Audio output
(source)
CHAT MIC (mic audio:
GAME not routed
MUSIC through a bus)
SYSTEM STREAM
(STREAM MIX
bus audio)
PERSONAL
(PERSONAL MIX
bus audio)
12
MIDI input/output
BRIDGE CAST X CTRL (for
transmitting/receiving MIDI
messages)
●
See the "MIDI
Implementation Chart" (PDF)
for details on what MIDI
messages can be transmitted
and received.
https://roland.cm/bridgecas
t_om
●
"BRIDGE CAST X-II CTRL" and
"BRIDGE CAST X-II APP" are
recognized as MIDI devices
when accessing from a MIDI-
compatible app on your
computer.
driver(P.16)
Audio output
MIC (mic audio: not routed through a bus) or STREAM (STREAM MIX bus audio)
Set the audio to output via the USB port from "OUTPUT" Ó
(MOBILE/CONSOLE)" in the menu screen of the BRIDGE CAST app.
)
®
to USB Type-C cable to connect to a computer, a mobile device such as a smartphone or a
® ®
setting should match the device that's connected.
MIDI input/output
BRIDGE CAST X CTRL (for transmitting/receiving MIDI
messages)
●
See the "MIDI Implementation Chart" (PDF) for details on
what MIDI messages can be transmitted and received.
https://roland.cm/bridgecast_om
●
"BRIDGE CAST X-I CTRL" and "BRIDGE CAST X-I APP" are
recognized as MIDI devices when accessing from a MIDI-
compatible app on your computer.
Keyboard (HID) Video output
output
Outputs the hot Outputs the video signal
key that's assigned input from the HDMI IN 1,
to the control pad. 2 connectors as-is.
* To output video
"USB OUT MODE
Keyboard (HID) output
Outputs the hot key
that's assigned to the
control pad.
from the USB port,
set the signal that's
input to the HDMI
IN 1 and 2
connectors to 4K/60
Hz or 1080P/60 Hz.
Video is not output
from the USB ports
if a video signal
that's not at 4K/60
Hz or 1080P/60 Hz
resolution is
inputted.