Connecting To Your Computer Or External Equipment And Configuring The Settings; Connecting To A Computer/External Equipment - Roland BRIDGE CAST X Owner's Manual

Connecting to your computer or external equipment and configuring the settings

Connecting to your computer or external
equipment and configuring the settings
This section explains how to connect this unit to your computer or external equipment (such as a mic, monitor speakers or tablet)
and how to configure your computer's device settings.
â
Connecting to a computer/external
â
Configuring the device settings on your

Connecting to a computer/external equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any
connections.
* Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear
some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.
1. Connect your mic, monitor speakers, headphones, mobile device or other external equipment to this
unit.
2. Connect your computer to the USB I or USB II port.
To import the video output signal from the BRIDGE CAST X into your computer, connect to the USB II port.
3. Set the USB I or USB II connection settings switch to "PC", according to the USB port you're using.
3. Turn on your computer or video game console, and then turn on this unit.
4. Turn on your external equipment.
5. Launch the BRIDGE CAST app.
6. to ensure a listenable volume balance while playing the
Adjust the volume
video game console,
18
equipment(P.18)
computer(P.20)
or .
voice chat mic
game audio from your computer
,