Table of Contents
Advertisement
Set Up Features
(cont.)
Located On Remote Control
Selects or Adjusts
Features when
Menu IS Displayed
Displays and Exits Menus
Mode (TV or Cable)_
' IMPORTANT NOTE: The proper input mode must be
I selecjed Jor th^e type of signal at the antenna input.
V TV is used when the Receiver is not connected to a
Cable TV System, for example, when using a
VHF/UHF antenna (Channels 02-69)
• CABLE IS used when the Receiver is connected to a
Cable TV System
Note;
Some Cable TV Sys^tems encode (scramble)
program matenal on specific channels A cable
company supplied decoder is required to repro¬
duce an acceptable picture Certain Cable TV
Systems offset some channels to reduce inter¬
ference It will be necessary to use the cable
company supplied converter to receive these
specific channels
1
Press the ACTION button to display the Mam Menu
2
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set Up Icon
3
Press the ACTION button to display the Set Up
Menu
4
Press the CH UP/DOWN button to highlight Mode
5
Press the VOL LEFT/RIGHT button to select TV or
CABLE
6
Press the ACTION button twice to exit the Set Up
Menu
StarSight Notes:
_
• MODE IS automatically set and locked to whatever
setting StarSight is using when StarSight is active
-
39
-
Advertisement
Table of Contents
