Table of Contents
Advertisement
Timer Feature
(cont.)
Special Feature:
Automatic "OFF" after 90 minutes.
The TV has a special feature that will shut itself
OFF after 90 minutes when turned ON by the
program timer, unless a function key is pressed
during the 90 minutes.
This feature is useful so that the TV will not
remain ON unattended for an extended period
of time
Programming the OFF timer will also cancel the
automatic OFF feature
(Program) Timer
-The (Dual Program) Timer
feature is capable of turning the TV on to a desired
channel and then turning the set OFF at a
predetermined time
_
Note: The clock and day must be set for this feature
to operate. (Refer to Set Up Menu to Set Time <
and Day.)
1
Press the ACTION button to display the Mam
Menu
2
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Timer Icon
3
Press the ACTION button to display the Timer
Control Menu
4 Press the CH UP/DOWN button to highlight the
TIMER 1 or TIMER 2 setting
•
Day or days you wish the Timer to activate
•
ON (time) - hours and minutes
•
OFF (time) - hours and minutes
•
CH - channel you want tuned when the ON
Timer activates
•
SET - NO (Timer feature will not activate)
- YES (Timer feature will activate)
5
Highlight the Timer 1 Day/Days option
6
Press the VOL LEFT/RIGHT button to set the day
or days you wish the Receiver to turn ON
The options for setting day are (MON-FRI),
(SAT-SUN), (DAILY), (SUN), (MON). (TUE),
(WED), (THR), (FRl), (SAT), (EVR SUN), (EVR
MON). (EVR TUE). (EVR WED), (EVR THR),
(EVR FRl). (EVR SAT)
7
Press the CH DOWN button to highlight the ON
(Hours) position
8
Press the VOL LEFT/RIGHT button to set the
desiredjime forthe_Receiver to turn ON
Note: Press CH DOWN to change selection from
hours to minutes
9
Press the CH DOWN button to highlight the OFF
(Hours/Minutes) position
10 Press the VOL LEFT/RIGHT button to set the time
you wish jhe Receiver to turn OFF
•Note: Press CH DOWN to change selection from
hours to minutes
11 Press the CH DOWN button to highlight the CH
position
12 Press the VOL LEFT/RIGHT button to select a
channel (from Program Channel Memory) that
you want to be tuned to when the set turns ON
13 Press the CH DOWN button to highlight the SET
position
14 Press the VOL RIGHT button to activate or LEFT
button to deactivate Timer 1
• YES=:Feature is activated
• NO=Feature ts not activated
15 Press the CH DOWN button to set Timer 2 (if
desired) Follow Steps 6 through 14
16 Press the ACTION button twice to exit the Timer
Control Menu
• Note: Pressing the ACTION button again will
return to Timer Icon
Helpful Hints:
• The Program Timer overrides the Sleep Timer
• Program Timer can only access channels m
Program Channel Memory
• "Set Time First" will appear on screen when trying
to set Timer Day Option without the clock being set
• If the Program Timer "ON" functions while the set is
operating the set will automatically tune to the
channel designated in the Program Timer
-31
-
Advertisement
Table of Contents
