35-CLEANING
•
turn the flap "U" of the ash pan (the flap has a stop "z" for the stroke end)
•
vacuum any ash deposited inside the flap "U"
z
U
•
remove the inspection cap "V" by removing the two screws "x"
•
with the vacuum cleaner remove the accumulated ash inside
Attention! Once the cleaning phases are complete, remember to close all the doors, lower the ash gate "S" and insert the
brazier "T".
REMEMBER THAT ONLY A CORRECTLY POSITIONED AND CLEAN BRAZIER CAN GUARANTEE SAFE IGNITION AND OPTIMAL
OPERATION OF YOUR PELLET PRODUCT. IN CASE OF FAILED IGNITION AND AFTER ANY OTHER BLOCK STATE OF THE
PRODUCT, IT IS ESSENTIAL TO EMPTY THE BRAZIER BEFORE EVERY RESTART
Technical Dept. - All rights reserved - Reproduction prohibited
U
V
x
59