MCZ CLUB COMFORT AIRMATIC 14 M2 Operation And Cleaning page 28

25-CHRONO-SLEEP
TIME SLOT PROGRAMMING
T1 or T2 or T3 and T4 cannot be edited on this screen but only from the main screen through SET TEMP.
Continuing with the programming, the mode chosen for that time slot and then ventilation are set.
Please note that ventilation can only be selected when programming the AUTO mode. If the COMFORT or
OVERNIGHT mode is selected at the ventilation field
can be performed.
After adjusting ventilation (only to AUTO) or the mode, you can cyclically continue editing by repeatedly
pressing the SET key.
To confirm all the programming and exit the screen, press the
whether to confirm the time slot (CONFIRM) or to exit without saving (EXIT).
After exiting the screen, you return to the summary screen of the day you are editing (MONDAY) for
potential programming of another time slot.
If you wish to confirm all the programming of the day you are programming, press
will return to the menu for selecting the days of the week (MONDAY, TUESDAY, etc.)
28
At the start of programming, the first START field is coloured red. Use the
adjust the START time of the chrono slot.
Advances are in 30 MINUTE STEPS (00:00 / 00:30 / 01:00...).
Use the SET key to confirm the selected time and move on to the next END setting which in
turn lights up in red. The END adjustment is carried out with
. Then move on to adjusting the desired temperature by setting in this case T1 or T2 or T3 or T4
(T3 and T4 for HYDRO STOVES). The temperature corresponding to T1 or T2 is displayed next to T1
or T2. If instead you wish the stove to be off, select OFF.
, dashes - - - will be shown and no modification
OK key, a window will appear asking
and confirmed with
OK again and you
keys to