MCZ CLUB COMFORT AIRMATIC 14 M2 Operation And Cleaning page 33

25-CHRONO-SLEEP
CHRONO VARIANT FOR HYDRO STOVES
MANAGEMENT OF T3 AND T4
PROGRAMMABLE PARAMETERS IN THE TIME SLOT
Technical Dept. - All rights reserved - Reproduction prohibited
If T3 and T4 temperatures are selected, the summary display simply changes colour and the key
is updated since it is not possible to set the chrono slot where both the AIR temperatures (T1 and
T2) and the WATER temperatures (T3 and T4) are present simultaneously
When temperatures T3 and T4 are selected in the programming, the representation of the day
will take the colours of T3 and T4
With respect to AIR products, there are fewer possible settings which are only START, END and the
water temperature in the puffer/boiler.
As there is no option to set modes and ventilation, these parameters disappear.
33