Maintenance Procedures; Engine Oil - BRP SeaDoo GTI PRO 130 Operator's Manual

MAINTENANCE PROCEDURES

This section includes instructions for
basic maintenance procedures.
WARNING
Turn off the engine and follow
these maintenance procedures
when performing maintenance.
If you do not follow proper main-
tenance procedures you can be
injured by hot parts, moving parts,
electricity, chemicals or other haz-
ards.
WARNING
Should removal of a locking device
(e.g. lock tabs, self-locking fasten-
ers, etc.) be required, always re-
place with a new one.
NOTICE
Never leave any object,
rag, tool, etc., in the engine com-
partment or in the bilge.

Engine Oil

Recommended Engine Oil
Rotax ® engines were developed and
validated using the XPS™ oil. BRP rec-
ommends the use of its XPS engine oil
or an equivalent at all time. Do not add
any additives to the recommended en-
gine oil. Damages caused by the use
of an oil not suitable for the engine or
by adding of an additives may not be
covered by the BRP Limited Warranty.
______________
88
XPS RECOMMENDED ENGINE OIL
4T 5W40 SYNTHETIC
Scandinavia
4T 5W40 SYNTHETIC
Other
Countries
If THE RECOMMENDED XPS
ENGINE OIL IS NOT AVAILABLE
Use a 5W40 4-stroke SAE
synthetic engine oil meeting
or exceeding the following
lubricant industry specifications.
Always check the API service label
certification on the oil container, it must
contain at least one of the indicated
standards.
– API service classification SJ, SL,
SM or SN
Engine Oil Level
NOTICE
Check level frequently
and refill if necessary. Do not over-
fill. Operating the engine with an
improper level may severely dam-
age engine.
CAUTION Many components
in the engine compartment may be
very hot. Direct contact may result
in skin burn.
Oil level can be checked with water-
craft either in or out of water.
If Watercraft is Out of the Water
NOTICE
Watercraft must be level.
CAUTION When operating the
engine out of water, the heat ex-
changer in the ride plate may be-
come very hot. Avoid any contact
with the ride plate as burns may oc-
cur.
1. Raise trailer tow pole, then block in
position when bumper rail is level.
BLEND OIL (EUR)
(P/N 779290)
BLEND OIL
(P/N 779133)