Table of Contents
Advertisement
Operating Instructions
Placing a Call
When the Handset Is on the Base
1. Remove the Handset from the Base Unit and press
2. The talk LED will light.
3. Dial the number you are calling.
4. When you have finished the call, return the Handset to the Base
Unit to hang up.
When the Handset Is off the Base
1. Pick up the Handset and press
2. The talk LED will light up.
3. Dial the number you are calling.
4. When you have finished the call, press the
to hang up.
Answering a Call
When the Handset Is on the Base
1. When the EXP92 rings, remove the Handset from the Base.
2. The talk LED will light, indicating a connection has been made.
3. After you have finished your conversation, return the Handset to
the base to hang up.
When the Handset Is off the Base
1. When the EXP92 rings, pick up the Handset and press any key.
2. The talk LED will light, indicating a connection has been made.
3. After you are finished with your conversation, press the
button to hang up.
Selecting a Different Channel
If you have more than one cordless phone in your house, they
must be set to different channels. This function works only
when the phone is in use.
C
The
button on the Handset allows you to choose between
40 factory set channels. During the course of a conversation if
you hear static or noise which makes it difficult to hear the caller:
C
1. Press
.
2. The talk LED flashes, indicating the EXP92 is changing to
another channel.
T
.
T t o n
16
T
.
T
Advertisement
Table of Contents
