Erasing A Stored Number; Replacing A Stored Number; Selecting A Different Channel; Using The Flash Button - Uniden EXP 7900 Series Owner's Manual

Erasing a Stored Number

Erasing a Stored Number
1. Remove the handset from the base. 1. Remove the handset from the base.
2. Press mem twice. 2. Press mem twice.
3. Press the memory location number (0-9) you 3. Press the memory location number (0-9) you
want to clear. You hear a long beep confirming want to clear. You hear a long beep confirming
that you have erased the number. that you have erased the number.

Replacing a Stored Number

Replacing a Stored Number
Remember, your EXP 7900 Series phone has 10 Remember, your EXP 7900 Series phone has 10
memory locations, represented by the numbers 0-9 memory locations, represented by the numbers 0-9
on the keypad. If you store a phone number in one on the keypad. If you store a phone number in one
of these locations, then attempt to store a different of these locations, then attempt to store a different
number in the same location later, the new number number in the same location later, the new number
will replace the previous one. will replace the previous one.

Selecting a Different Channel

Selecting a Different Channel
If you encounter interference while using your If you encounter interference while using your
phone, you can manually change the phone channel phone, you can manually change the phone channel
for clearer operation. Interference can come from for clearer operation. Interference can come from
appliances or other phones in your home. This appliances or other phones in your home. This
function works only when the phone is in use. function works only when the phone is in use.
The chan button on the handset allows you to The chan button on the handset allows you to
choose between 30 factory set channels. During the choose between 30 factory set channels. During the
course of a conversation, if you hear static or noise course of a conversation, if you hear static or noise
which makes it difficult to hear, press chan . The talk which makes it difficult to hear, press chan . The talk
LED flashes, indicating the phone is changing to LED flashes, indicating the phone is changing to
another channel. another channel.

Using the Flash Button

Using the Flash Button
Use flash for accessing services such as call waiting. Use flash for accessing services such as call waiting.
If you receive a call during your conversation, press If you receive a call during your conversation, press
the flash button on the handset. Press flash again to the flash button on the handset. Press flash again to
return to the previous call. return to the previous call.

Using the Page/Find Feature

Using the Page/Find Feature
The Page/Find feature sends a signal from the base The Page/Find feature sends a signal from the base
to the handset causing it to beep. This is useful for to the handset causing it to beep. This is useful for
locating the handset when it is away from the base. locating the handset when it is away from the base.
To use this feature, press page/find on the base. The To use this feature, press page/find on the base. The
handset beeps for 60 seconds. handset beeps for 60 seconds.
The paging feature does not work
when the phone is in use.
On the handset, press any key to end the page. If On the handset, press any key to end the page. If
you press talk , you must press talk again if you do you press talk , you must press talk again if you do
not wish to make a call. not wish to make a call.

Traveling Out of Range

Traveling Out of Range
During a call, as you begin to move too far from During a call, as you begin to move too far from
your base unit, noise increases. If you pass the range your base unit, noise increases. If you pass the range
limits of the base, your call will terminate within limits of the base, your call will terminate within
30 seconds. 30 seconds.
10