Add A Port Triggering Service - NETGEAR DOCSIS C6230 User Manual

Note: If you use applications such as multiplayer gaming, peer-to-peer connections,
real-time communications such as instant messaging, enable Universal Plug and Play
(UPnP).

Add a Port Triggering Service

To add a port triggering service:
1. Launch a web browser from a computer or mobile device that is connected to the
cable modem router network.
2. Enter http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the cable modem router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering page displays.
5. Select the Port Triggering radio button.
The page adjusts.
6. Click the Add Service button.
The Port Triggering-Services page displays.
7. In the Service Name field, type a descriptive service name.
8. In the Service User menu, select Any, or select Single address and enter the IP
address of one computer:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer.
9. Select the service type, either TCP or UDP.
If you are not sure, select TCP/UDP.
10. In the Triggering Port field, enter the beginning port number.
11. In the Triggering Ending Port field, enter the ending port number.
12. Enter the inbound connection port information in the Connection Type, Starting
Port, and Ending Port fields.
13. Click the Apply button.
Specify Internet Port Settings
C6230 WiFi Cable Modem Router
94 User Manual