NETGEAR DOCSIS C6230 User Manual page 15

3. Connect the power adapter.
Connect the power adapter to the cable modem router and plug the power adapter
into an electrical outlet.
The startup procedure takes about one minute. When it is complete, the Power LED
lights solid green.
4. Wait for the cable modem router to come online.
This process might take up to three minutes.
Note: When the Online LED lights, your cable modem router is still not connected
to the Internet. You must activate your cable modem router with your ISP.
5. Connect a computer or mobile device to the cable modem router with a WiFi or
wired connection:
• WiFi. Use the WiFi network name and password on the cable modem router
label.
• Wired. Use an Ethernet cable to connect a computer to an Ethernet port on the
cable modem router.
6. Launch a web browser and set up your cable modem router.
You are automatically redirected to the cable modem router web interface. If you're
not redirected, enter http://routerlogin.net or http://192.168.0.1 in the address
field of the web browser.
Follow the prompts to set up your cable modem router.
7. Make sure that you can log in to the cable modem router web interface after the
setup.
In a new web browser window, enter http://routerlogin.net or http://192.168.0.1
and then enter the cable modem router admin user name and password.
If the BASIC Home page displays, you are ready to activate your Internet service.
8. Activate your Internet service.
Even though an Internet connection is established, Internet service is available only
after you set it up with your cable Internet provider. For information about how to
activate your Internet service, see Activate Your Internet Service on page 16.
Hardware Setup
C6230 WiFi Cable Modem Router
15 User Manual