Table of Contents
Advertisement
Install the Printer Driver and Cable the Printer
Some USB printer manufacturers (for example, HP and Lexmark) request that you do
not connect the USB cable until the installation software prompts you to do so.
To install the driver and cable the printer:
1. On each computer on your network that shares the USB printer, install the driver
software for the USB printer.
If you cannot find the printer driver, contact the printer manufacturer.
2. Use a USB printer cable to connect the USB printer to a cable modem router USB
port.
Download the ReadySHARE Printer Utility
The utility works on Windows-based and Mac computers.
To download the utility:
1. Visit netgear.com/readyshare.
2. Scroll down to the Print From the Comfort of Your Home Network section at the
bottom of the page.
3. Click one of the following links:
• Download PC installer and get started. This is the utility for Windows-based
computers.
• Download Mac installer and get started. This is the utility for MAC computers.
4. Follow the onscreen instructions to download the ReadySHARE Printer utility setup
file and install it.
Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the
printer. After you install it, the utility displays as NETGEAR USB Control Center on your
computer. For more information about how to use the NETGEAR USB Control Center,
visit https://www.netgear.com/support/product/ReadySHARE_USB_Printer.aspx.
Share a USB Printer
C6230 WiFi Cable Modem Router
50
User Manual
Advertisement
Table of Contents
