Table of Contents
Advertisement
Blind Spot Information System
SWITCHING BLIND SPOT
INFORMATION SYSTEM WITH
TRAILER COVERAGE ON AND OFF
1.
Press the button on the
E386797
touchscreen.
2. Press Driver Assistance.
3. Switch Blind Spot Information
System on or off.
Note: Some vehicles may not have the
ability to switch the feature on or off.
When you switch the system off, a warning
lamp illuminates and the alert indicators
flash twice.
Note: The system turns off and a message
appears when a trailer is connected, but not
set up or selected.
SETTING A TRAILER LENGTH
E225008
A
Trailer length.
B
Trailer width.
C
Trailer hitch ball.
You can set up a trailer to work with the
blind spot information system through the
touchscreen. When setting up a trailer, a
sequence of screens appear asking for
trailer information.
1.
Select the type of trailer; conventional,
fifth wheel or gooseneck.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Note: The system only supports a
conventional trailer.
2. Do you want to set up blind spot with
trailer screen? No, the system turns off.
Yes, the system takes you to the next
screen.
3. Is the width less than or equal to 8 ft
(2.4 m)and the length less than or
equal to 33 ft (10 m)? Yes, the system
takes you to the next screen. No, the
system turns off.
4. Trailer width measurement. Measure
the width at the front of the trailer. The
maximum width the system can
support is 7.9 ft (2.4 m).
Note: You do not need to enter an exact
trailer width measurement. You only need
to confirm the width of the trailer is less than
or equal to 8 ft (2.4 m).
5. Trailer length measurement. The trailer
length is the distance between the
trailer hitch ball and the rear of the
trailer. The maximum length the
system can support is 33 ft (10 m).
6. Enter the length of trailer. The default
setting is 25 ft (7.6 m). Select a length
that is equal to or within 3 ft (1 m) of
the actual measured length. For
example, if the actual measured length
is 25 ft (7.5 m), toggle the length in the
menu to 27 ft (8.2 m). The system
setup saves when you enter the trailer
length.
Note: If the trailer is a bike rack or cargo
rack with electrical lighting, enter a length
of 3 ft (1 m). Cross traffic alert remains on
for trailers with a length of 3 ft (1 m) or less.
Note: The system requires that you enter
the correct measurement for it to properly
function.
304
(If Equipped)
Advertisement
Table of Contents
Troubleshooting
