Ford RANGER 2024 Owner's Manual page 466

E360005
Note: When you are changing the front flat
tire, connect the jack handle to the jack.
Operate the jack handle with the lug nut
wrench.
2. Assemble the jack handle, including
the required extension tubes depending
on the position you are jacking, and turn
the jack handle clockwise until the
wheel is completely off the ground.
Note: When changing the rear flat tire,
connect all the handles together to extend
the jack handle.
E360006
3. Raise your vehicle until the tire is clear
of the ground.
4. Use the locking wheel nut key to loosen
the locking wheel nut.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Changing a Road Wheel
462
5. Remove the lug nuts and the road
wheel.
Installing a Road Wheel
WARNING: Use only approved
wheel and tire sizes. Using other sizes
could damage your vehicle.
WARNING: Do not fit run flat tires
on vehicles that were not originally fitted
with them. See an authorized dealer for
more details about compatibility.
WARNING: Make sure there is no
grease or oil on the threads or the
surface between the wheel studs and
the wheel nuts. This can cause the wheel
nuts to loosen while driving.
WARNING: Have the wheel nuts
checked for tightness and the tire
pressure checked as soon as possible.
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure the cones on the lug nuts
are against the wheel.
1. Install the wheel.
2. Install the lug nuts and finger tighten.
3. Install the locking lug nut key.
E79156