If your SportCat is not performing properly, try the steps
listed below.
PROBLEM
Scanner won't work.
Improper reception.
Scan won't stop.
Scan won't start.
Search won't start.
Keypad won't work.
If you still cannot get satisfactory results and want
additional information, or to return the unit for service,
please call or write the Uniden Parts and Service Division.
The address and phone number are listed in the Warranty
(at the end of this manual).
Troubleshooting
Check the power connections.
Check the volume and squelch.
Make sure the power switch is
turned on.
Check the antenna connection.
You may be in a fringe area.
Reposition the scanner.
Adjust the Squelch Control.
Check the antenna connection.
It is possible that none of the
programmed frequencies are
active at the time. Try Band
Search.
Make sure there are some
programmed channels.
Adjust the Squelch Control.
Adjust the Squelch Control.
Check the Keypad Lock.
29
SOLUTION