Troubleshooting - Uniden UBC69XLT-2 Owner's Manual

UB334 Paper OM reduced size.fm Page 35 Friday, September 9, 2005 11:16 AM

Troubleshooting

If your UBC69XLT is not performing properly, try the
following steps.
Problem Possible Cause
The The scanner
scanner might not be
doesn't receiving any
work. power.
Improper The scanner's
reception. antenna might
need to be
adjusted.
Scan The squelch
won't might need to
stop. be adjusted.
The antenna
might need to
be adjusted.
One or more
channels might
be locked out.
Suggestion
Check the batteries.
Check the antenna
connection or move
or reposition the
antenna.
Move the scanner.
You might be in a
remote area that
could require an
optional multi-band
antenna. Check
with your dealer or
local electronics
store.
Adjust the squelch
threshold. See
"Turning On The
Scanner and
Setting Squelch" on
Page 25.
Check the antenna
connection.
Make sure the
channels you want
to scan are not
locked out.
Troubleshooting
35