Table of Contents
Advertisement
Cleaning (Feeding Bottle)
Cleaning (Feeding Bottle)
This function is used for all kinds of feeding bottles.
➊
➋
➌
➍
Notes:
1. High temperature will occur when using steam to wash feeding bottles. All bottles and accessories
must be heat-proof temperature over 110 °C before using this function.
2. Fill the tank with water before using.
3. When overheated in cavity, "U50" will appear in the display window. Please wait until the cavity cool
down and clean the feeding bottles after "U50" disappear.
4. After cleaning, you should take feeding bottle out quickly.
Place wire rack with feeding bottle
on the metal tray in the lower shelf
position. Then select Auto Menus
by pressing Select button.
Press Set button to set Auto Menus.
Press Select button until "20"
appear in the display window.
Press Start button once.
- Eng-41 -
Advertisement
Table of Contents
