Sync; H-Freq. (Khz)N-Freq. (Hz) - Panasonic TH-42PHW5 Operating Instructions Manual

SET UP for Input Signals
SYNC
Select SIGNAL from the "SET UP" menu during RGB or PC input signal mode.
ust.
R
O
Press to exit from adjust mode.
Setting
RGB sync
signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT). CSYNC
H & V: The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input CSYNC <J_b_
from the G connector.
ON VIDEO: The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals. CSYNC 4 _
_
Setting PC sync signal
Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT). _SYNC
H & V: The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input from _SYNC
the G connector.
H-FREQ (kHz)N-FREQ (Hz)
Displays
the H
(Horizontal)N (Vertical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
Horizontal 15.6- 110 kHz
Vertical 48 - 120 Hz
l
H-FREQ. _ kHz
V-FREQ. _ Hz
34