Color System / Panasonic Auto; 3:2 Pulldown - Panasonic TH-42PHW5 Operating Instructions Manual

SET UP for Input Signals
COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
Press to select the "COLOR SYSTEM" or
"Panasonic AUTO".
Press to select each function.
Mode
Color system
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Press _._ (ACTION) button
Function
Set the color system to match the input signal. If set to "AUTO", the color system is
determined automatically.
_AUTO_ PAL _ SECAM _ M.NTSC _ NTSC
/ /
Panasonic Set to "NORMAL" to view 4:3 images in an unchanged format when Panasonic AUTO
AUTO (4:3) is selected. If you would like to view 4:3 images in "Just" format, set to "JUST".
3:2 PULLDOWN
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) or
COMPONENT input signal mode. ("SIGNAL _IDEO]" menu is displayed.)
Press to select 3:2 PULLDOWN.
Press to set ON/OFF.
Press _-_ (ACTION) button
Note:
When ON, this setting only affects the following signal input.
• NTSC signal input during "VIDEO (S VIDEO)" input signal mode.
• 525i(480i) signal input during "COMPONENT" input signal mode.
3:2 PULLDOWN _ _ b
R
O-
Press to exit from adjust mode.
33