Noise Reduction; Sync - Panasonic TH-42LF20W Operating Instructions Manual

Noise reduction

Note:
Noise reduction can be adjusted while a Video or Component signal is being applied.

Sync

This function operates only during input from PC IN terminal.
Select Signal from the "Setup" menu during Component input signal.
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input fi rst is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "Sync on G"
Press to select "Noise reduction".
Press to select "Off", "Auto", "Min", "Mid", "Max".
Auto: Noise reduction will be automatically selected from "Min",
"Mid" or "Max".
Press to select the "Sync".
Press to adjust.
Setup for Input Signals
Noise reduction
Signal
Sync
Cinema reality
XGA Mode
Off
[ RGB ]
Auto
Off
1024 768
×
39