Storage - U-Line Echelon 2075DWRRSS User Manual

If the unit is to be stored or not used for extended periods:
1. Remove all contents from the unit.
2. Disconnect unit from main electrical power source.
3. Leave power cord disconnected until ready to reuse.
4. Prop the drawers open at least two inches to allow for air
circulation and prevent mold and mildew.
If the unit is to be stored or not used for extended periods, drain the
system of water.
1. Remove all contents from the unit.
2. Shut off water supply at the main water source.
3. Disconnect the water supply line from the solenoid valve.
4. Disconnect the water line from the solenoid valve outlet.
5. Allow the unit to run for an hour or more until all remaining ice cubes
have been ejected from the ice maker assembly.
6. Remove all ice from the ice bucket.
7. Dry out excess water from the ice maker assembly and ice bucket.
8. Prop the drawers open at least two inches to allow for air circulation
and prevent mold and mildew.
9. Disconnect unit from main electrical power source.
10. Leave water supply line and power cord disconnected until ready to
reuse.
The use of anti-freeze or other products of this nature is not
necessary and is not recommended.

STORAGE

NOTE
43