U-Line Echelon 2075DWRRSS User Manual page 18

User's Manual
CUSTOM INSERT DRAWER PANEL
Custom drawer panels can be inserted into the drawer frames to match the
surrounding decor. Custom drawer panels
can be flat or raised, as long as the
maximum panel thickness where inserted
into the drawer reveal (channel) is 1/4"
thick. For raised panels, the depth of
the reveal is 1/4" on all four sides. See
Table 2 for custom drawer panel insert
dimensions (Figure 17).
Table 2. Custom Insert Drawer
Panel Dimensions
A
12-15/16"
The total weight of both drawer panels or panel inserts
must not weigh more than 20 lbs.
Black drawer models come from the factory, equipped to
be used with full overlay drawer panels. Please refer to
your user's manual for instructions on preparing and
installing the full overlay drawer panels.
For all applications where full overlay drawer panels are
not used (examples are: custom 1/4 inch panel inserts,
or no panel at all - standard black finish), replacement
drawer handles MUST be installed on each drawer. The
part number is 11926-4-BLK and can be purchased from
your U-Line dealer.
B
23-1/32"
DRAWER HANDLE OPTIONS
18
Figure 17