Built-In Installation - U-Line Echelon 2075DWRRSS User Manual

BUILT-IN INSTALLATION

Your U-Line product is designed for built-in installation only. When built-in,
it does not require additional air space for the top, sides, or rear.
However, the front grille must NOT be obstructed.
Required for ease of installation and door opening, you must
allow an additional 1/4" to width of unit.
Width
23-15/16"
* For full overlay drawer panels, add 3/4".
The additional depth required for full overlay drawer panels only
applies to the
to accept full overlay drawer panels.
Once the unit is leveled and placed into the wall or under a
cabinet, it is ready to be secured to the wall or cabinet with the anti-tip
system (Figure 11).
Follow the instructions included with the anti-tip kit.
The anti-tip kit must be installed on this unit before it is used.
Never use the drawers as steps or a shelf to support more
than the drawers' content.
NOTE
Unit Dimensions
Height
34-1/8"
NOTE
and . The
!
WARNING
13
Depth*
24"
is not designed