Full Overlay Door Panel Installation Instructions Models 2075 DWR and CO2075DWR P .O. Box 245040 Phone 414.354.0300 Printed in U.S.A. P/N 30012 U-Line Corporation • Milwaukee, WI 53224-9540 • FAX 414.354.7905 www.U-LineService.com...
Page 2
OVERLAY PANEL KIT PARTS Part Number Description 42120 Spacer Nylon 3/8 OD x .19 ID 42121 Screw #10 x 5/8 Round Head Full overlay drawer panels completely cover the drawer frames and handle to give a built-in appearance. Table 1. Full Overlay Panel Dimensions Panel Dimensions 23-3/4"...
Page 3
Remove existing drawer front from cabinet: Open drawer. Pull door gasket (Figure 2) out of the groove (top edge of door only). Start in the middle and pull outward, moving toward the edge. This may take some force. Remove the two screws locat- ed on both sides of the lower handle.
Page 4
On a clean surface, place the wood panel face down and tape the existing drawer panel (removed in step 3) on the back of the wood panel (Figure 4) and drill the five (5) holes (5/32" drill 3/8" deep) through the drawer panel and 3/8" into the wood panel (Figure 1).