U-Line Echelon 2075DWRRSS User Manual page 15

OVERLAY PANEL KIT PARTS
Part Number
42120
42121
• The total weight of both drawer panels must not weigh
more than 20 lbs.
• The thickness of the drawer panel must be 3/4".
Remove existing drawer front from cabinet:
1. Open drawer. Pull door gasket
(Figure 12) out of the groove (top
edge of door only). Start in the mid-
dle and pull
toward the edge. This may take
some force.
2. Remove the two screws located on
both sides of the lower handle.
Remove the handle (Figure 13).
3. Slide the existing drawer panel and
cardboard
drawer frame. Discard the spacer.
Attaching the full overlay panel:
4. If required, attach optional cabinet
handle hardware to the overlay panel
at this time. If an optional cabinet
handle is installed, make sure the
mounting screw heads are counter-
sunk.
Description
Spacer Nylon 3/8 OD x .19 ID
Screw #10 x 5/8 Round Head
outward,
spacer out
moving
SCREW
of the
15
Quantity
10
10
HANDLE
Figure 12
Figure 13
GASKET
DWR_OL_001
DWR_OL_002