Epson SureColor P5370 User Manual page 149

Setting
Paper Source Settings
Custom Paper Setting
Print Nozzle Check Pattern
During Print
Paper Source Settings
Setting
Roll Paper Setup
Error Notice
Platen Gap Offset
Options Description
Various options See the Paper Source Settings table below
1 to 30 See the Custom Paper Setting table below
Every Pages Sets whether to print a nozzle check pattern
before the printer prints each page
Off
Options Description
Auto Loading Automatically feeds roll paper into the printer
Cut Settings
Auto Cut Automatically cuts the roll paper after printing
Print Cutting Guideline Select On to print cut lines on roll paper (if
Auto Cut is turned off)
Cut for Borderless Print Select Two Cuts to insert a margin and cut
twice between pages, or One Cut to cut once
between pages
Quick Cut Select On to cut once between pages while
the next page is still printing
Margin Refresh Select On to automatically remove ink stains
from a previous borderless print by trimming
the leading edge of the paper
Paper Size Notice Select On to display an error message when
the output size or paper type settings differ
Paper Type Notice
between the driver and printer, or if the paper
Detect Paper Skew
is skewed
Narrow Adjusts the distance between the print head
and the paper
Standard
Wide
Note: The Platen Gap Offset setting cannot
be set wider or narrower than the value set for
Wider
Platen Gap.
Widest
149