Table of Contents
Advertisement
Setting
Change Paper Type/Paper
Size
Advanced Paper Settings menu (in the Poster Board menu)
Setting
Paper Thickness
Paper Suction
Drying Time
Paper Size Check
Paper Feed Offset
Paper Feed
Offset(Bottom)
Restore Default Settings
Caution: If the Paper Size Check setting is set to Off, the printer may print beyond the edges of the
paper, causing ink to get on the printer.
Options
Description
Paper Type
Select a paper category and paper type.
Paper Size
Select a paper size or select User-Defined if
your desired size is not listed.
Options
Description
0.01 to 1.50 mm or
Sets the thickness of the paper; displayed for
custom paper settings.
0.4 to 59.1 mil
Note: Load poster board that is 0.031 to 0.059
inch (0.8 to 1.50 mm) thick and set the paper
thickness accordingly.
–4 to +4
Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Drying Time per Pass
Set the amount of time the printer pauses to
allow drying after each pass or each printed
Drying Time per Page
page.
On
Select On to detect the paper width when
paper is loaded.
Off
Select Off if a paper setting error occurs when
paper is correctly loaded.
–0.70 to +0.70%
Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
–0.70 to +0.70%
Adjust this setting if banding or uneven colors
appear on the bottom edge (0.59 inches [15
mm]) of the paper.
—
Restores advanced media settings to their
default values; not available with custom
paper types.
144
Advertisement
Table of Contents
