14
|
Unit installation
14 Unit installation
In this chapter
14.1 Preparing the installation site
14.1.1 Installation site requirements for the heat reclaim ventilation unit
14.2 Preparing the unit
Installer and user reference guide
42
14.1
Preparing the installation site ................................................................................................................................................
14.1.1
14.2
Preparing the unit...................................................................................................................................................................
14.2.1
14.2.2
To install the duct flanges ......................................................................................................................................
14.2.3
To install the EKVDX option ...................................................................................................................................
14.3
Unit orientation ......................................................................................................................................................................
14.4
To install the anchor bolts ......................................................................................................................................................
14.5
Duct connections ....................................................................................................................................................................
Choose an installation location with sufficient space for carrying the unit in and out
of the site.
Do NOT install the unit in places often used as work place. In case of construction
works (e.g. grinding works) where a lot of dust is created, the unit MUST be
covered.
Do NOT install a heat reclaim ventilation unit or air suction/discharge grille in the
following places:
▪
Places, such as machinery plants and chemical plants, where noxious gases or
corrosive components of materials such as acid, alkali, organic solvent and paint
are present.
▪
Places, such as bathrooms, subject to moisture. Moisture can cause electrical
shock, electric leakage and other failures.
▪
Places subject to high temperature or direct flames.
▪
Places subject to much soot. Soot clings to air filter and heat exchange elements,
disabling them.
CAUTION
See
"3 Specific installer safety
complies with all safety regulations.
Service space
See
"23.2 Service
space" [
CAUTION
See
"3 Specific installer safety
complies with all safety regulations.
instructions" [
4
108].
instructions" [
4
12] to make sure this installation
4
12] to make sure this installation
VAM350~2000J*VEB*
Heat reclaim ventilation unit
4P664012-1A - 2024.01
42
42
42
43
45
45
46
47
48